TECHNICAL
CHARACTERISTICS
Dimensions:
115 x 170 x 70 mm.
Working frequency:
24.000 - 29.500 Hz.
Power supply:
230 Vac +/- 10% 50/60 Hz - 20VA (optional
115 Vac).
Water supply
pressure: 1-6 bar with lateral knob.
Continuously adjustable.
Water button:
Allowing to work with or without water.
Mectron
Control Starlight System: Identifies
automatically the type of handpiece connected
to the cord (scaler or Starlight p led photopolymerizator)
and sets up suitable parameters of functioning.
Feedback System:
Automatic and instantaneous power control
in function of the resistance encountered
by the insert.
Automatic Protection
Control: Interrupts power and water
supply in case of incorrect use of the handpiece
and insert tip.
Protections
& Signals: Check indicating APC
(automatic protection circuit) which eliminates
all tension on the handpiece and inhibits
functioning of the water solenoid valve
in the following cases:
- Disconnection
of handpiece triggering time APC 20ms
- Electrical
damage of the handpiece cord triggering
time APC 20ms
- Insert
not tightened properly triggering time APC
80ms
Starlight:
Signal that a light-curing cycle is in progress
Equipped with new osseonitrated insert
tips S1 and S6
|
